Filter
Top Products
49
Using the DVC-1100 with Routers, Gate-
ways or Broadband Modems (continued)
A total of 7 ports must be opened for the DVC-1100 to work with most routers
or firewalls. To open these ports, please do the following:
A. Click Enabled
B. Give the Virtual Server a Name (such as i2eye)
C. Under Private IP, enter the IP Address obtained from the
DVC-1100
(How to obtain an IP Address from the DVC-1100:
Turn the DVC-1100 ON. Using the remote control
highlight the Settings button on the Main Screen.
Navigate to Settings>Network>Network Address
>IP Address)
D. Under Protocol Type, choose Both (TCP and UDP)
E. Under Private Port and Public Port, enter 15328
F. Under Schedule, click Always
G. Click Apply to save this entry
Opening Ports on Your Routers and Gateways (continued)
A
B
C
D
E
F
G
15328
15328
How to open ports on a router