Filter
Top Products
35D-Link ShareCenter Shadow DNS-325 User Manual
Section 4 - Configuration
S.M.A.R.T. Test
S.M.A.R.T. stands for “Self-Monitoring, Analysis, and Reporting Technology”. This is a system on a hard drive used to monitor and report on the health of the drive. If the
HD is grayed out, then it does not support S.M.A.R.T.
S.M.A.R.T.
Test
To run the S.M.A.R.T. test, select the hard drive you wish to
perform the S.M.A.R.T. test on. Then select whether to run a
Quick or Extended S.M.A.R.T. test. Then press “Start” to run
the test. Press the Create Schedule button to run the test at a
pre-determined time and date.
Quick Test
Runs a quick S.M.A.R.T. test. The test usually takes less than
10 minutes. This test will check the electrical, mechanical,
and read performance
of the hard drive. The results are displayed as Passed/Failed
on the web UI and can also be sent as an e-mail alert.
Extended Test
Runs an extended S.M.A.R.T. test. This test requires a lot
more time to complete. However, it is a more thorough and
complete test when compared to the Quick Test.
Send result
by E-mail:
Enable this function in order to have the results of the
S.M.A.R.T. test sent to you by e-mail.
Create
Schedule
Click on this button in order to create a scheduled
S.M.A.R.T. test. You will be able to schedule a test on a
daily, weekly, and monthly basis.