Filter
Top Products
User Manual
Publication date: July, 2006
Revision A2
4
• Supports programmable per-port storm control
• Per-port ingress/egress rate control with 64K/128K/256K ( up to 100Mbps)
resolution
• 8K MAC addresses with automatic learning and aging
• Programmable per-port flow control and backpressure
• Supports 802.1p Port Classification with four priority Queues
• Maximal packet length can be up to 1536 bytes
• Supports Ingress and Egress Bandwidth rating management
• Supports Broadcasting Suppression to avoid network suspended or crashed
while a bunch of network device up after power lost and recover again
• Supports the trap event
• Supports default configuration
• Supports TFTP for firmware upgrade
• Supports on-line plug/unplug SFP/GBIC transceiver modules
• Supports concisely the status of port and easily port configuration
• Supports per port traffic monitoring counters
• Supports a snapshot of the system Information when you login
• Supports port mirror function
• Supports the static trunk function
• Supports user management and limits one user to login
• Supports Broadcasting Suppression to avoid network suspended or crashed
• Supports to send the trap event while monitored events happened
• Supports default configuration which can be restored to overwrite the current
configuration which is working on via Web UI and Reset button of the switch
• Supports Quality of Service (QoS) used for vlan tag priority and has VIP port
priority that is the same as port based QoS
• Built-in web-based management instead of using CLI interface, providing a more
convenient GUI for the user