Filter
Top Products
User Manual
Publication date: July, 2006
Revision A2
62
Appendix A
Technical Specifications
Features
• The switch included 24-Port 10/100Mbps TP and 2-Port Gigabit Dual Media
TP/SFP or TP/GBIC.
• Supports 24-port 10/100M TP ports with Nway and auto MDIX function.
• 24 Port 10/100Base-TX + 2 Port Gigabit TP/SFP switch supports 2 Gigabit dual
media ports(TP/SFP) and 2 slots for removable SFP module supporting 1000M
SFP fiber module.
• 24 Port 10/100Base-TX + 2 Port Gigabit TP/GBIC switch supports 2 Gigabit
dual media ports(TP/GBIC) and 2 slots for removable GBIC module supporting
1000M GBIC fiber module.
• Supports on-line plug/unplug SFP/GBIC transceiver modules.
• Meets all IEEE 802.3/u/x/z Gigabit and Fast Ethernet specifications.
• Web-Smart management.
• Supports 802.1p, Port based QoS packet and can be classified with four priority
queues.
• Supports 802.1Q-based VLAN with 26 entries.
• Protected port support.
• MAC-based trunking with automatic link fail-over.
• Support programmable per-port storm control.
• Per-port ingress/egress rate control with 64K/128K/256K (up to 100Mbps)
resolution.
• 8K MAC addresses with automatic learning and aging.
• Programmable per-port flow control and back-pressure.
• Maximal packet length can be up to 1536 bytes
• Supports Ingress and Egress Bandwidth rating management.
• Supports per port status for monitoring.
• Supports per port media configuration.
• Supports Port-based and 802.1Q Tag-based VLAN.
• Supports Link Aggregation (Port Trunk).
• Supports 802.1p Port Classification with four priority Queues.
• Supports Port Mirror for sniffer.
• Supports Broadcasting Suppression.
• Supports Trap Host and Events Configuration.
• Supports IP Configuration: IP Address, Subnet mask, Gateway.
• Supports Trap Host IP.
• Supports System Events: Warm Boot, Cold Boot, Illegal login.
• Supports TP and Fiber Port Events: link up, Link down.
• Supports Trap Events Counters.
• Supports TFTP for firmware upgrade.