Filter
Top Products
User Manual: Elo
®
Tablet
SW602113 Rev C, Page 15 of 59
3. Ethernet indicator LED
Flashes green when the mounted tablet is connected to a network via an Ethernet cable.
4. Dock alignment pins (bottom)
These pins support tablet mounting onto the docking station. Align and slide these pins into the
docking pin ports located on the tablet to mount the tablet to the docking station. For more
information on how to mount the tablet onto the docking station, refer to Chapter 3.
5. Battery Screw
Loosen the battery thumb screw to remove battery from the docking station battery
compartment. Tighten the battery thumb screw to secure a battery into the docking station
battery compartment.
6. Dock alignment pins (top)
These pins support tablet mounting onto the docking station. Align and slide these pins into the
docking pin ports located on the tablet to mount the tablet to the docking station. For more
information on how to mount the tablet onto the docking station, refer to Chapter 3.
7. Dock lock
Turn this accordingly to lock/unlock a mounted tablet onto the docking station. When in the
‘locked’ position, pressing the dock release button will not release the tablet from the dock.
8. Dock release button
Press this button to remove the tablet from the docking station. Turning the dock lock to ‘locked’
position will disable this functionality.
9. Dock-Tablet connector
When the tablet is mounted properly onto the Elo Tablet Dock, this connector connects with the
Tablet-Dock connector located on the tablet to establish connection between the two devices.
Refer to Chapter 3 for more information on tablet integration to the docking station.
10. Dock battery compartment
To access the dock battery compartment, remove the dock battery compartment door (by
loosening its screw) that comes with the docking station. Use this battery compartment to
charge a spare battery via the dock. The docking station is designed to allow simultaneous
charging of a spare battery mounted in this battery compartment and a tablet mounted onto the
docking station.
11. Dock cable cover
Remove dock cable cover to access the USB ports, Ethernet port, and VGA located behind the