Filter
Top Products
User Manual: Elo
®
Tablet
SW602113 Rev C, Page 56 of 59
During use, the actual SAR values for your device are usually well below this value. This is
because, for purposes of system efficiency and to minimize interference on the network, the
operating power of your mobile device is automatically decreased when full power is not
needed for the wireless connection. The lower the power output of the device, the lower its SAR
value.
If you are interested in further reducing your RF exposure then you can easily do so by limiting
your usage or simply using accessories to keep the device further away from the body.
European Union:
The SAR limit recommended by The Council of the European Union is 2.0W/kg. This device’s
maximum SAR value is well below the EU limits with the following highest measured SAR value
under the EU testing guidelines:
Body SAR, 0 cm distance (10g) Wi-Fi, Bluetooth: 0.420 W/kg
The tablet Wi-Fi and Bluetooth device complies with the Specific Absorption Rate (SAR) for
general population/uncontrolled exposure limits (2.0W/Kg) as specified in EN 62311:2008 / EN
62209-2:2010 and EN 62479:2010, respectively.
IV. EC R&TTE Directive
This equipment conforms to all the essential requirements of Directive 1999/5/EC. The
conformity assessment procedure referred to in Article 10 and detailed in Annex [IV] of Directive
1999/5/EC has been with the involvement of the following notified body:
Timco Engineering, Inc.
P.O. BOX 370
Newberry, Florida 32669
Identification mark: 1177 (Notified body number)
The relevant technical documentation is held at:
Elo Touch Solutions, Inc.
1033 McCarthy Boulevard
Milpitas, CA 95035-7920
USA