Emerson 50 and 60 Hz Power Supply User Manual


 
Battery Installation
34
Figure 19 SENXA0NBCWXX4LCB_2x4
W102
W101
W001
W301
W001
W001
W001
W001 W001
W001
W001
W003
W001
W001
W001
W302
W001
W001 W001
W001
W001
W001
W001
W001 W001
W001
W001
W001
W001
W001 W001
W001
W001
W001
W001
W004
W002
W004
W002
W004
W003
W003
W002
W004
Tray in Layer 3
Tray in Layer 1
Tray master
Layer 1
Layer 3
Tray master
Tray master
Layer 4
Layer 2
Tray master
Tray slave
FRONT VIEW
Layer 1
Layer 2
Tray slave
SPACE
BCB
BCB(125/200A)
TO UPS
Tray in Layer 2
Tray master
SPACE
BCB
Tray slave
Tray in Layer 4
TO UPS
Tray slaveTray master
Tray slaveTray master
Tray slaveTray master
3. Used for: UH12V270/A,310/A,370/A,500/A; UPS12-270,310,370,475;
A412/50,65 G6; NPL65-12; NPL78-12; NPL100-12; 1290S.
2. If no internal Control board used, temp. transport cables should be
connected directly to external BCB control board. Meanwhile, the
undervoltage release function for the internal BCB is not needed.
1. Please refer to BCB BOX user instructions for cable connection.
NOTE:
N.O.
V<
RED
BLACK
N
P
BCB Control board
GND
OUT
P12
Temp. transport
X104-2
Temp. channels reserved for Batt. cabinet Paralleling
RED
GREEN
GREEN
BLUE
X104-1
X103-3
X103-1
X103-2
RED
BLUE
X108-2
X108-3
J1
X106-1
X105-3
X105-2
X105-1
X104-3
X106-3
X106-2
X100-4
X100-3
X100-1
X102-2
X102-4
X108-1
X102-3
X102-1
X101-3
X101-1
X100-2