Filter
Top Products
1
AXP1406/AXP1600 Subsystem IPMI Programmer’s Reference (6806800B66C)
15
Supported IPMI Commands
1.1 Introduction
This chapter describes the different commands supported by the Centellis 3000 series
platforms. Command categories are as follows:
z Standard IPMI Commands
z PICMG 3.0 Commands
z Emerson and Pigeon Point OEM Commands
1.2 Standard IPMI Commands
The IPMC is fully compliant to the Intelligent Platform Management Interface v.1.5. This section
provides information on which IPMI commands are supported. Table entries marked with an “x”
indicate which FRU or ATCA blade supports a listed command.
1.2.1 Global IPMI Commands
The IPMC supports the following global IPMI commands.
Table 1-1 Supported Global IPMI Commands
NetFn Rq/Rs Command CMD
Active
ShelfMgr
Physical
ShelfMgr PEMs FTMs
ATCA
Blades
Get Device ID 0x06/0x07 0x01 X X X X X
Cold Reset 0x06/0x07 0x02 X X X X
Warm Reset 0x06/0x07 0x03 X X X
Get Self Test Result 0x06/0x07 0x04 X X X X X
Set ACPI Power State 0x06/0x07 0x06 X X *
Get ACPI Power State 0x06/0x07 0x07 X X *
Get Device GUID 0x06/0x07 0x08 X X X X X