Filter
Top Products
3-18 Chapter 3
Define the Preferred Novell NetWare File Server
Upon power up, the Emulex printer server normally goes through fileservers
in the bindery to find the first available fileserver with configuration
information. In a large network this may create unnecessary traffic and take
some time. Use the following to specify a direct attachment to the Novell
file server node that contains the configuration information.
1) Log in to the printer server with supervisor privilege.
2) Enter:
>
Server>> define node node_name nfserver
node_name The preferred NetWare file server node name
3) Enter:
>
Server>> sync
4) Turn power to the printer server off and on.
Define the Method of Discovery (NetWare 4.xx)
The Pserver must defined to do bindery discoveries, NDS discoveries or
both.
>
Server>> define server wetware pserver [disable
|auto |3.x |4.x]
choose one of the following keywords:
disable disables the NetWare protocol on this printer server
auto enables both bindery and NDS modes
3.x enables bindery mode
4.x enables NDS mode
The default is auto.