Emulex NQTR0V-NATM Printer User Manual


 
Novell NetWare 3-17
5) At Server>, enter su:
>
Server> su
This gives you supervisor status.
6) At Password>, enter system:
>
Password> system
System is the default privileged password which does not echo back.
7) Change terminal emulation mode to ANSI.
>
Server>> change port type ANSI
8) At the Server>> prompt, view or change current parameters.
Refer to the list of commands in the
Command Reference Guide.
9) Log out of the printer server:
>
Server>> logout
Configure Specific NetWare Parameters
IMPORTANT: This section contains advanced features.
All parameters should be configured by the
Network Administrator.
Add NetWare Password to Printer Server
A single password will be used for login to both bindery and NDS systems.
When defining a password on the NetWare file server, the password must be
entered in the printer server.
1) Login to the printer server with supervisor privilege.
2) Enter:
>
Server>> define server netware password
3) When prompted for the password, enter the eight-character NetWare file
server password defined in PCONSOLE.