Filter
Top Products
Windows NT 9-3
Without DHCP
1) Login to the Emulex printer server.
Refer to the Remote Login or Local Login section later in this chapter.
2) Enter:
>
Server>> define node ip ip_address
ip_address The IP address of the designated node in decimal
dot notation. For example, 123.234.345.490
Installation
Any Windows NT computer can be used to created a TCP/IP printer if
TCP/IP is installed with printing support. Follow the steps below to
configure a Windows NT computer for TCP/IP printing.
In the
CONTROL PANEL:
1) Select
NETWORK option.
This opens the
NETWORK SETTINGS dialog box.
2) Click
ADD SOFTWARE button.
This displays the
ADD NETWORK SOFTWARE dialog box.
3) Select TCP/IP Protocol and Related Components.
4) Click
CONTINUE.
This opens the
WINDOWS NT TCP/IP INSTALLATION OPTIONS dialog
box.
5) Check
TCP/IP NETWORK PRINTING SUPPORT.
If TCP/IP is not already installed on this computer, check the other
desired options as described in the
Windows NT System Guide.
6) Click
OK.
7) Enter the full path to the Windows NT distribution files.
8) Click
CONTINUE.
All necessary files are copied to the hard disk.