Filter
Top Products
Connecting to the Network
2-18 Installation
ToinstallaSFP/XFP,refertoFigure 2‐10andproceedasfollows.
1. Withanantistaticwriststrapattachedtoyourwrist,removethetransceiverfromits
packaging.Ifthereisaprotectivedustcoverinthetransceiverconnector,donotremoveitat
thistime.
2. Holdthetransceiversothatthe
connectorwillseatproperly.
3. CarefullyalignthetransceiverwiththeportslotasshowninFigure 2‐10.
4. Pushthetransceiverintotheportslotuntilit“clicks”andlocksintoplace.
Figure 2-10 Installing an SFP/XFP (shown with LC connector and without dust cover)
Caution: Carefully follow the instructions in this manual to avoid damaging the SFP/XFP and
G-Series.
The SFP/XFP and G-Series are sensitive to static discharges. Use an antistatic wrist strap and
observe all static precautions during this procedure. Failure to do so could result in damage to the
SFP/XFP and G-Series. Always leave the SFP/XFP in the antistatic bag or an equivalent antistatic
container when not installed.
Precaución: Siga las instrucciones del manual para no dañar el SFP/XFP ni del aparato, puesto
que son muy sensible a las descargas de electricidad estática. Utilice la pulsera antiestática y tome
todas las precauciones necesarias durante este procedimiento. Si no lo hace, podría dañar el SFP/
XFP o del aparato. Mientras no esté instalado, mantenga el SFP/XFP en su bolsa antiestática o en
cualquier otro recipiente antiestático.
1 Release tab 4 Edge connector (insertion side)
2 Wire handle 5 Port slot
3 Transceiver top side 6 Transceiver side view