Filter
Top Products
Connecting to Computers, Cameras, and Other Equipment 37
3. When you’ve finished making any connections, see page 17 for
instructions on turning on the projector and adjusting the image.
Connecting to the USB Port
You can connect a Windows XP or Windows 2000 (SP4) computer to
the projector’s Type B (square) USB port and project your
computer’s display. This allows you to connect two computers at the
same time. A USB 2.0 connection provides better picture quality and
response than USB 1.1.
The first time you connect a computer to the projector’s USB port,
software from the projector installs on your computer.
1. Follow the instructions beginning on page 17 to turn on the
projector and adjust the image.
2. Turn on your computer.
3. Locate the USB cable that came with your projector.
4. Connect the square end of the cable to the projector’s Type B
(square) USB port.
5. Connect the flat end of the cable to any available USB port on
your notebook or desktop computer.
Messages appear as the projector is recognized and the software
installation begins.
note
The USB Display feature is
not available on Windows
98, Windows Me, or
Macintosh. You must be
able to install software on
your computer to use this
feature.
You can’t use the remote
mouse control function
when you use the USB port
to project your computer’s
display.
USB cable