Filter
Top Products
subscript
Printing in which each character is printed at about two-thirds the
normal height in the lower part of the character space.
superscript
Printing in which each character is printed at about two-thirds the
normal height in the upper part of the character space.
tear off
A control panel button that automatically feeds the perforation of
continuous paper to the tear-off position and then feeds the paper
back to the loading position.
tear-off position
The position the printer feeds the paper to when you press the TEAR
OFF button or when auto tear-off mode is on. Using the micro-feed
feature, you can adjust the position so that the paper’s perforation
meets the printer’s tear-off edge.
top of form
The position on the paper that the printer recognizes as the first
printable line. The printer feeds the paper to this position when it
loads the paper.
unidirectional printing
Printing in one direction only. Unidirectional printing is useful for
printing graphics because it allows more precise vertical alignment
than bidirectional printing.
user-defined characters
Characters that are defined and stored in the printer by the user.
Also known as downloaded characters.
GL-6 Glossary