Filter
Top Products
Control Panel
BIN 2 (green)
On when bin 2 of the optional cut-sheet feeder is selected for paper
feeding.
TEAR OFF
(yellow)
On when you press the TEAR OFF button to feed continuous paper
to the tear-off position.
CONDENSED
(green)
On when you select condensed printing from the control panel.
Font (green)
On when a specific font is selected.
Buttons
PAUSE
Press this button to temporarily stop printing. Press this button
again to resume printing.
LOAD/EJECT
Press this button to load single-sheet or continuous paper to the
loading position. However, the printer normally loads paper
automatically. If single-sheet paper is already in the loading
position, use this button to eject the sheet. If continuous paper is in
the loading or tear-off position, press this button to feed it
backward to the standby position.
LF/FF (line feed/form feed)
Tap this button briefly to feed the paper forward one line. Hold this
button down to eject a single sheet of paper or advance continuous
paper to the top of the next page. You can also use this button to
load a single sheet of paper from the cut-sheet feeder or to feed
continuous paper from the standby position to the loading position.
Using the Printer 3-3