Filter
Top Products
Auto
line
feed
When the auto line feed feature is on, each carriage return (CR)
code is accompanied by a line feed
(LF)
code. If your printed
text is unexpectedly double-spaced, set this feature to off. If text
lines print on top of each other, set it to on.
Changing the default
settings
To change the printer’s default settings, you press the control
panel buttons; the control panel lights show your selections.
Follow the steps below to make your changes:
1.
Make sure the printer is turned off and paper is loaded in
the paper feeder.
2.
Hold down the
Economy/Condensed
button and turn on
the printer to enter the default-settings mode. (Hold down
the button until the printer starts working; it takes a few
seconds.)
The printer loads a sheet of paper and prints a brief
summary and instructions. It instructs you to select the
language that you want messages printed in (English,
French, German, Italian, or Spanish).
3.
Press the
Font
button until the
Font
lights indicate the
language of your choice; then press the
Alt
button to make
your selection.
Spanish
ooe
0
on
l off
Using Other Printer Functions
2-15