Filter
Top Products
4.
Lift the cartridge out of the printer and dispose of it
properly. Do not take the used cartridge apart or try to refill
it.
q
Caution:
If ink does get on your hands, wash them thoroughly with soap
and water.
lf
ink gets into your
eyes,flush
them immediately
with water.
5.
Turn to page
l-11
and follow the steps there to install the
new cartridge.
Note:
When you replace the cartridge, the printer will not recharge the ink
delivery sys
tern
again. However, the print head may start moving as
the
prirzter
performs normal maintenance procedures. This can take
up to 40 seconds to complete.
Cleaning the Print Head
If print quality diminishes, use the printer’s built-in print-head
cleaning cycle to ensure that the nozzles are delivering ink
properly. To avoid wasting ink, clean the print head only if
print quality declines.
Follow these steps:
1.
Make sure the printer is
turned
on and the
Pause
light is
on. If the
Pause
light is not on, press the
Pause
button to
pause the printer.
2.
Hold down the
Alt
button and press the
Pause
button for
two seconds.
The cleaning cycle takes about
40
seconds. The
Pause
light
flashes throughout the cycle and then stays on when the
cleaning cycle is finished.
3.
Press the
Pause
button to resume printing.
Maintenance and Troubleshooting
3-3