Filter
Top Products
Getting Started
1-7
1.5 Installing the Ribbon Cassette
It is recommended to use only original ribbon. Using other ribbons will void your
warranty.
Caution: Never manually move the print head (11) fully to the right hand stop.
Note: Always press [START/STOP] before opening the top cover.
1. Switch the printer ON at the power switch (10); Power LED (53) is lit.
2. Press .
3. Lift the top cover (6) to gain access to the ribbon cassette mounting. The
print head (11) will move to the correct position, aligned with the cut-out in
the paper guide plate (12) to facilitate the installation of the ribbon cassette.
4. Remove any excess slack by turning the green knob (14) on the ribbon
cassette clockwise. Move the ribbon feed guide (13) to the position indicated
on the plastic cover of the cassette (2a).