Filter
Top Products
Getting Started
1-17
1.9 Connection to a Computer
Parallel/Serial Interface
S Switch the printer and computer OFF.
S Connect the interface cable coming from the computer to the printer's parallel
(27) or serial port (28).
S The printer is by default set to SHARED interface mode with the following
parameters:
S 8 Kbyte buffer
S 8 bit
S even parity
S 9600 baud
S DTR protocol
SHARED means that, after Power-ON, both the serial and the parallel interface
are available for data transfer. The port to which data is sent becomes active
automatically. If the parallel or serial parameters need to be changed, see
Appendix A, Interface Description..