Filter
Top Products
Configuring the printer
3-11
S The right margin is set to print position 80, 132 or 136, always measured
from the position of the first possible, not actual, left margin setting.
The left margin setting is influenced by the physical setting of the left tractor.
The above specifications are only correct if the tractors are in the original
positions, i.e. the left perforation is aligned with the center mark on the plastic
plate (distance between the marks is / ").
1
10
S The top margin indicates the first print line and is always set in steps of / ".
1
6
The position of the first margin is / " from the top of the paper and indicates
1
6
the baseline of the letter H in upright "Data" font (see illustration).
The top margin can be set to a maximum of / " down on the paper.
16
6