Filter
Top Products
serial interface
Tighten the screws on both sides of the connector.
Note:
If the screws that come with the cable do not fit into the connector
lock nuts on the interface, replace the lock nuts with the optional
lock nuts provided with the printer.
3. If your cable has a ground wire, connect it to the printer’s
ground connector as shown below.
4. Plug the other end of the cable into the computer.
serial interface
connector
me-20-1
Me-20-2
Me-21
1
R
Maple Rev.D
A5 size Chapter 1
97/06/17 pass 0
Setting Up the Printer
1-11