Filter
Top Products
Functions of Pressing the Button
❏
While the Red light flashes slowly:
Function of button Clears an error.
Operation Hold down the button until the yellow and Red lights both go on
after release. The printer prints a status sheet indicating the error
type.
❏
While the Red light flashes fast:
Function of button Prints any of the following page.
- Feed jam or paper empty page
- Manual feed page
Operation Load the paper or clear the jam, and then hold down the button
until the yellow and Red lights go on, then release to continue
printing.
❏
While yellow light is flashing slowly (except in EPSONScript mode):
Function of button Prints out data in the printer’s memory.
Operation Hold down the button until the yellow and red lights go on, then
release the button to continue printing.
❏
While the yellow light is on (except in WPS mode):
Function of button Prints a status sheet.
Operation Hold down the button until the yellow and red lights go on, then
release the button to continue printing. The yellow light flash while
the status sheet is being printed.
❏
Reset (always effective except during warm up or status sheet printing):
Function of button Clears current port.
Operation Hold down the button until the yellow and red lights go on, and
when these lights start flashing alternately, release the button.
❏
Warm boot (always effective except during warm up or status sheet printing):
Function of button Warm boot (same as power on reset, except for engine initialization).
Operation Hold down the button until the yellow and red lights start flashing
at the same time, then release the button.
EPL-5500 Service Manual General Description
Rev. B 1-19