Filter
Top Products
48 - Picture Quality Adjustment
Tracking Adjustments (when projecting computer images)
Adjusted when vertical stripes are apparent on the computer image.
1
Press the [Tracking +, -] button on the projector.
Synchronization Adjustments (when projecting computer
images)
Adjusted when flashing, blurring and vertical noise are apparent on the computer image.
1
Press the [Sync +, -] button on the projector.
Calling out adjustment values
(when projecting computer images)
It is possible to record preset adjustment values and call them out when required.
1
Press the [Preset] button on the remote control.
The pre-registered numbers between preset #1 and preset #5 will change in sequence
whenever this button is pressed.
Point
· There are cases when these adjustments must be made again if the values output from
the computer (resolution, display color) are amended after flashing and blurring have
been adjusted.
· There are cases where flashing and blurring is caused by adjusting the brightness and
contrast*.
· Images will be projected more vividly if synchronization adjustments are made after the
tracking adjustments.
· Auto adjustments, tracking adjustments and synchronization adjustments are not possible
if no image signals are being input by the computer, such as when projecting video
images or displaying menus.
· The preset values must be registered beforehand. (see page 65
)
S
y
n
c
.
S
y
n
c
.
T
r
a
c
k
i
n
g
T
r
a
c
k
i
n
g
S
y
n
c
.
S
y
n
c
.
T
r
a
c
k
i
n
g
T
r
a
c
k
i
n
g
Esc
Menu
Comp1
P in P Preset
Video
Help
- Volume +
Preset
Comp2/YCbCr
Auto
Resize