Filter
Top Products
80 - Troubleshooting
Point
· Refer to the section on [When the Indicators Provide No Help] on the following page if the
Indicators appear normal but the projected image is defective.
· Contact your dealer if an Indicator status not covered by the above table is apparent.
Blinking in
Orange
High-temperature
cooling in progress
(This is not an error, but the projector will
automatically cease operating if the tempera-
ture increases any further.)
·Use the projector within the permissible
temperature range of between 5 degrees
Celsius and 40 degrees Celsius.
·Install the projector in a well-ventilated place
and ensure that the ventilation inlet and
outlet are not blocked.
22
·Clean the Air Filter. 89
Extinguished (Not an error)
The power has not been switched on or nor-
mal projection is in progress.
Indicator Status Cause Recovery and Status Reference
Page