Filter
Top Products
78 - Troubleshooting
Troubleshooting
When you think you have a problem, first of all check the Indicators on the projector.
The projector is fitted with Operation Indicator, Lamp Indicator and Temperature Indicator to
advise the user of the projector’s status.
Operation Indicator
Indicator Status Cause Recovery or Status Reference
Page
Illuminated in
Orange
Stand-by status (Not an error)
Projection will be started when the [Power]
button is pressed.
39
Blinking in
Orange
Cool-down proce-
dure in progress
(Not an error)
·Wait for a moment. The acount of time for the
projector to cool down (cooling the lamp) will
depend on the external temperature, etc.
·The [Power] button cannot be used during
the cool-down period. This will be
illuminated in orange once the cool-down
process has been completed, so press the
button once more then.
46
Illuminated in
Green
Projection in
progress
(Not an error) 40
Blinking in
Green
Warm-up in
progress
(Not an error)
·Wait for a moment.
·The amount of time required for the warm-up
procedure is approximately 30 seconds.
·The green lamp will stop blinking and
become illuminated once the warm-up
procedure has been completed.
40
Illuminated in
Red
Internal error Cease operations, remove the Power Plug from
the socket and contact your dealer or nearest
adress provided at page 104 and request
repairs.
Operation Indicator
Lamp Indicator
Temperature Indicator