Filter
Top Products
86 - When the Indicators Provide No Help
No sound
The remote control won’t work
●
Has the sound input been connected correctly?
see page 31
, 35
●
Has the image for which sound is required been selected?
see page 41
●
Is sound being emitted from connected equipment?
Confirm the sound from connected equipment, etc.
Has the volume been turned right down?
see page 60
●
Has the [A/V Mute] function been left on?
There is a possibility that the [A/V Mute] mode is in effect.
Press the [A/V Mute] button, adjust the volume, or display the menu
to cancel the [A/V Mute] status.
see page 52
●
Is the [R/C ON OFF] switch on the remote control on?
see page 40
●
Is the remote control being aimed in the correct direction?
The operable range of the remote control unit is 30° to the left and
right, and 15° up and down.
see page 20
●
Is the distance between the remote control and the projector too
great?
The operable distance of the remote control unit is approximately
10m.
see page 20
●
Is the remote control receiver connected and the remote control
being aimed at the projector?
●
Is the light-receiving area on the remote control blocked?
●
Has the remote control light-receiving area been subject to direct
sunlight, flourescent light or any other strong light source?
●
Have the batteries been mounted in place?
see page 21
●
Have the batteries run out?
●
Have the batteries been mounted back to front?
see page 21
Power
Freeze
A/V Mute
E-Zoom
R/C ON
OFF
3
1
5
2
4
Enter
Esc