Filter
Top Products
68 - Menu Operations
Set-
ting
Sleep Mode Sets the energy-saving function for when no image signals
are being input. When this is set at [ON], projection will be
automatically ended and the projector will enter the sleep
mode if no image signals are input and no operations are
performed for a period of thirty minutes (the operation indi-
cator will be illuminated in orange).
Press the [Power] button to restart projection.
ON
Reset Returns all setting menu adjustment values to the default
values.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Select [Reset All] to return all image and sound values to the
default settings. (see page 69
)
-
Cap-
ture
User’s Logo
Capture
Registers user logos. (see page 70
)
Press the [Enter] button and follow the instructions dis-
played on the confirmation screen.
·The saving procedure requires a certain amount of time to
complete. Do not attempt to operate the projector or the
equipment connected to the projector while this procedure
is running. Failure to observe this may result in damage.
·The size that can be registered is 400 x 300 dots.
·The display size will be adjusted when video images are
being projected.
Not registered
Adva
nced
Language Sets the language with which messages are to be displayed.
Press the [Enter] button and select the required language
from the language selection menu displayed.
Japanese
Startup Screen Displays the user logo during warm-up after the power has
been switched on.
·The user logo must be registered and set up before it can be
amended.
OFF
Color Setting Adjusts the color temperature of the image.
Auto: Automatically adjusts the color settings.
Manual: Press the [Enter] button and select the required item
from the color setting menu displayed.
·Set the color temperature value to the yardstick value.
·The black level and white level settings are only used when
multiple projectors are used in the stack formation.
Auto
To p
Menu
Sub Menu Function Default Value