Filter
Top Products
Computer Connections - 73
Computer Connections
Establish a serial connection between the computer and projector when EMP Link V is being
used. The computer and projector can be connected together with serial.
Serial Connections
Point
· Depending on the shape of the computer port, an adapter may be required for connection
purposes. Refer to the computer’s instruction manual for further details.
· The connected computer is used to amend the projector settings and to perform opera-
tions. Connect the computer that is required to output projection images to the Computer
#1 or Computer #2 port. (see page 25
)
· Switch on the projector and ensure that the connection has been set up before using the
software.
● Windows Computers
Connect the projector’s Mouse/Com Port to the computer’s serial port with the use of the PC
Serial Cable and Main Cable supplied.
Caution
· Ensure that the power supply to the projector has been switched off before attempting to
establish the connection. Failure to observe this may result in equipment damage.
· Confirm the shape of the cable connector and the port before establishing the connection. If
connections are forced despite the connector and port being different shapes, it may result
in malfunctions and equipment damage.
PC SERIAL
Mouse/Com Port
Main Cable
(supplied with the projector)
PC Serial Cable
(supplied with the projector)
Serial Port