Filter
Top Products
43
When You Suspect a Problem
Troubleshooting
When You Suspect a Problem
First, check the indicators on the projector. There are two indicators on the projector unit which notify you of projector conditions.
Power indicator
lit flashing • If the indicator is not lit, the power supply is not on.
Power indicator
Warning indicator
Condition Cause/Remedy s
Orange Standby state
The power cable should only be disconnected when the projector is in this state.
Press the [Power] button to start projection.
P.22
Orange Cool-down in progress
• Please wait. The cool-down period lasts about 20 seconds.
• You cannot operate the [Power] button during the cool-down period. Press the power button again after cool-down has
finished.
P.22
Green Projection in progress
P.22
Green Warming-up
Please wait. Warming up takes about 35 seconds (the EPSON logo appears after approximately 6 seconds). When warming
up is complete, the indicator changes to steady green.
P.22