Filter
Top Products
Caution
Installing or removing a disk drive is a complicated
procedure,
so you may want
to ask your dealer to do it for
you. If you decide to do it yourself, you must carefully
follow all the instructions in this appendix or you could
damage your equipment.
Using the Correct Drive Bay
The upper horizontal drive bay probably contains the
diskette drive that came with your system. That drive can be
one of the following types:
Ci
S&inch diskette drive
Ci
3l%-inch
diskette drive with a
W&inch
mounting frame
installed on it.
You can install an additional drive of one of the following
types in the lower horizontal drive bay:
0
PA-inch diskette drive, tape drive, CD-ROM, or other
storage device
0
3M-inch
diskette drive, hard disk drive, or other storage
device with
5?4inch
mounting frames installed on it.
Your computer may have come with a hard disk drive already
installed in the vertical mounting position. If not, you can
install one
3%inch
hard disk drive in this position.
If you are installing your first hard disk drive, it is best to
install it in the vertical mounting position. If you add a
second hard disk drive or diskette drive, use the lower
horizontal drive bay.
B-2
Installing and Removing Disk Drives