Filter
Top Products
If you want to change or check the lever, push it toward the platen
(the black roller) until it stops. This is the first position. Then pull the
lever toward you. You will feel three more click stops. The table below
shows which position you should use.
Table 2-I. Paper thickness lever positions
Paper
Lever
thickness
position
Single
2nd
With 1 copy
3rd
With 2 copies
4th
*Maximum total thickness IS 0.25mm
Position 1 is for thinner paper, and positions 5 and 6 are for
thicker paper. These positions should rarely be used. If they are,
the printing quality will not necessarily be as good as on paper as
specified in the technical specifications.
Always return the lever to the second position when you resume
printing on normal paper.
Choosing and Loading Paper 2-9