Filter
Top Products
Tilt the tractor cover up and remove the two foam pads underneath
it. (These pads protect the tractor unit during shipping; be sure to save
them.)
WARNING
The printer is protected by a print head protector, a platen
protector and two locking tabs during shipping. These protective
items must be removed before you turn on the printer. Follow the
steps below Figure 1-2.
Also, you should install the paper feed knob. To install the knob,
simply push it onto the shaft on the right side of the printer as
shown in Figure 1-2.
1. Remove the left locking tab.
2. Remove the print head protector.
3. Move the print head to the left.
4. Remove the right locking tab and the platen protector.
2 Selecting the Right Location
The most important consideration in choosing a location for your
printer is that it be close enough to connect a cable to your computer.
But also keep the following tips in mind:
1-2
Setting Up Your FX Printer