Filter
Top Products
Chapter 1
Setting Up Your FX Printer
Setting up your new FX is easy. Simply follow the steps in this
chapter.
Note
The FX-86e and FX-286e are basically the same printer except that the
FX-286e can accept wider paper. Therefore, the illustrations in this
manual show only the FX-86e.
1 Unpacking Your Printer
First, remove the printer from the box and take off all outside plastic
covering and foam supports. Make sure you have received all the parts
shown in the illustration below.
Figure 1-1
Printer parts
Setting Up Your FX Printer
1-1