Filter
Top Products
Paper Handling 19
To feed continuous paper backward to the standby position, where you
can remove the paper, first tear off any printed sheets. Then press the
Load/Eject button. Open the sprocket covers on the tractor and remove
the paper.
c
Caution:
Always tear off your printed document before you press the Load/Eject
button. Reverse feeding several pages at a time may cause a paper jam.
Switching between continuous paper and single sheets
If you want to switch to single sheets while continuous paper is loaded in
the push tractor position, follow these steps:
1. Tear off your printed document.
c
Caution:
Always tear off your printed document before you press the
Load/Eject button. Reverse feeding several pages at a time may
cause a paper jam.
2. Press the Load/Eject button to feed the paper backward to the
standby position.
3. Push the paper release lever back to the single sheet position.
4. Follow the instructions on page 27 to load single sheets.
To switch back to continuous paper, follow these steps:
1. Press the
Load/Eject button to eject any sheet in the printer.
2. Move the paper release lever to the continuous paper position.
3. Press the
LF/FF button to load the paper on the tractor.