Filter
Top Products
34 Using the Control Panel
3 LF/FF button
❏ Feeds paper line by line when pressed and released.
❏ Ejects a single sheet or advances continuous paper to the next
top-of-form position when held down.
❏ In Micro Adjust mode, adjusts the top-of-form and tear-off position.
4 Load/Eject button
❏ Loads a single sheet of paper.
❏ Ejects a single sheet of paper.
❏ Loads continuous paper from the standby position.
❏ Feeds continuous paper backward to the standby position.
❏ In Micro Adjust mode, adjusts the top-of-form and tear-off position.
5 Pause button
Stops printing temporarily, and resumes printing when pressed again.
When held down for three seconds, turns on Micro Adjust mode. To turn
it off, press it again.
6 Paper Out light
❏ On when no paper is loaded in the selected paper source or when
paper is not loaded correctly.
❏ Flashes when paper has not been fully ejected or if paper is jammed
in the printer.
7 Pause light
❏ On when the printer is paused.
❏ Flashes when the printer is in Micro Adjust mode.
❏ Flashes when the print head has overheated.