Filter
Top Products
Chapter 6 Problem Solver 102
EPSON Status Monitor 3
EPSON Status Monitor 3 provides status messages and a graphic
display showing the current status of the printer.
If a problem occurs while printing, an error message appears in
the Progress Meter window.
Printing a Self-Test
Running the printer’s self-test helps you determine whether the
printerorthecomputeriscausingtheproblem:
❏ If the self-test results are satisfactory, the printer is working
properly and the problem probably results from your printer
driver settings, application settings, computer, or interface
cable. (Be sure to use a shielded interface cable.)
❏ If the self-test does not print properly, there is a problem with
the printer. See “Problems and Solutions” on page 105 for
possible causes and solutions to the problem.
Note:
❏ Prepare an A4 size sheet of paper before entering the self-test
printing mode.
❏ Always close the printer cover before printing. The printer does not
print when the printer cover is open.
Follow these steps to perform a self-test:
1. Turn off the printer.
c
Caution:
Whenever you turn off the printer, wait at least five seconds
before turning it back on; otherwise you may damage the
printer.