Filter
Top Products
Chapter 5 Control Panel 95
3. When the Ready light turns on,insert a sheet of A4 paper into
the front slot. The printer prints the version number and the
language selection for the default settings menu. The
underline shows the selected language. Select the language
by pressing the F1/Eject button.
4. Press the F2 button to set the language. The printer prints a
message asking if you wish to print the current settings. If you
wish to print the current settings, press the F2 button. The
printer prints the current settings. The underline shows the
setting value that is currently selected for each item. You can
also bypass printing the current setting by pressing the
F1/Eject button.
5. The printer prints the setting method and the first selection of
the main setup menu.
You can select the main setup menu by pressing F2.Then
press the F1/Eject to set it.
6. Select the menu parameters which you wish to change by
pressing the F1/Eject button (for the next item) or the Offline
button (for the previous item). The printer prints the item and
the current setting value of that item is underlined.
7. Press the F2 button to change the value and the printer prints
the next value.
8. You may either continue to make changes to other parameters
bypressingthe F1/Eject or Offline button.Themenuselection
will return to the selection of thethree main setup menus after
the selection of the last parameter on each menu is done.
Common Settings menu
PR2Mode Settings menu
Other Emulation Settings menu