Replacing Ink Cartridges 27
5. Before you open the new cartridge package, shake it gently four or five times. Then
remove it from the package.
Caution: Do not touch the green chip or the small window on the ink cartridge.
This can damage the cartridge.
6. Remove the yellow tape from the side of the ink cartridge.
Caution: Do not remove any other labels or seals, or ink will leak.
7. Insert the new ink cartridge into the holder and push it down until it clicks into place.
8. Lower the scanner unit.
9. Press
OK to begin charging the ink. This takes about 1 1/2 minutes. When you see a
completion message on the LCD screen, ink charging is finished.
Caution: Never turn off the product while ink is charging or you’ll waste ink. If you see
an ink replacement message on the LCD screen, press
OK and press down all the
cartridges securely. Then press OK again. If you remove a low or expended ink
cartridge, you cannot reinstall and use the cartridge.
Note: If you replaced a cartridge while copying a document or photo, cancel printing
and make sure your original is still placed correctly on the document table. Then copy
your original again.