Filter
Top Products
Configuration and Management
The file system on a shared partition needs to be of a supported type;
otherwise the automatic mounting of the device will not work. Currently the
supported types are:
• FAT; Microsoft legacy file system from MS-DOS with 8.3 character
filename
• FAT32; Microsoft Windows 95 file system based on FAT but with long
file name
• ext2; Second extended file system, the standard Linux file system.
• ext3; Like ext2, but with journaling support.
When a storage device is connected to the Ericsson W25, information
about the device is displayed in the “SHARED STORAGE DEVICES”
section on the Sharing page. If this page is open when you connect the
device, a refresh of the page may be required for the new information to be
displayed:
Table 20 - Shared storage devices description
Text Description
The manufacturer’s name of the device.
Storage device
The name of the shared resource used when
accessing the device from a PC on the
LAN/WLAN.
Share name
To give a shared device a specific name, type a name in the corresponding
“Share name” field and click Apply to save the setting.
Note: If a “Share name” includes more than 12 characters or has
embedded spaces, the share name will not be visible in Windows
95, 98 or ME clients.
To access shared files from a PC using Windows 2000 or XP, follow the
instructions in section
- “Access a Shared USB Storage Device”. 5.3.2
4.8.4 Printer Sharing
The Ericsson W25 automatically creates a local UNIX printer that is shared
over the LAN/WLAN using SMB/CIFS protocol. The smb service only
performs protocol conversion between SMB/CIFS and the local printer.
When a printer is connected to a USB port on the Ericsson W25,
information about the printer is displayed in the “SHARED PRINTER”
section on the Sharing page. If this page is open when you connect the
printer, a refresh of the page may be required for the new information to be
displayed:
52 5/1551-CRH 102 167 Uen Rev E 2008-02-15