Filter
Top Products
Configuration and Management
Note: WLAN must be disabled before a software upgrade.
Then click Browse… in the “SOFTWARE UPDATE” section on the System
page to locate the file. The selected file will be displayed in the “Update the
system with new software” field.
Click Upgrade to start the installation. During the installation process, the
Software Update Initiated page is displayed:
Figure 42 - Software update initiated page
Wait until the following page is displayed:
Figure 43 - Software update complete page
Click the Restart button.
4.9.5 Factory Reset
The Ericsson W25 configuration can be reset to its factory default settings
from the System page.
Note: If the WUI is not accessible, a reset to factory default settings can
also be done using the Reset button on the unit. See section
6.2 –
Reset the Ericsson W25 to Factory Default Settings.
To reset the configuration to factory default settings, click Reset in the
“FACTORY RESET” section on the System page.
5/1551-CRH 102 167 Uen Rev E 2008-02-15
59