Filter
Top Products
Euphonix SH612 Studio Hub User Guide Menu Reference and Technical Specifications
35
Time Code Mode
The SH612 has three time code outputs: VITC, LTC, MTC. The time code outputs al-
ways represent the current time of the SH612.
Generate - This is the default mode for the SH612. Time code is internally generated,
routed to the time code outputs, and sample-rate-resolved.
External - With this setting the SH612 is locked to an external time code source and
generates the received time code position information at its outputs. This setting corre-
sponds to the Slave key on the R-1 Remote.
External Varispeed - This feature is available only on SH612s configured for R-1
systems.
Time Code Offset
Time Code Offset is only relevant when the SH612 is slaved to an external device or an
external device is slaved via LTC from the R-1. The R-1 does not output offset Time-
code. The Time Code Offset can be positive or negative, and range from 1 frame to
23:59:59:29. A negative offset is subtracted from the Time Code Source value; a posi-
tive Offset is added to the Time Code Source value. The equation for Current Time is:
TC Current Time = TC Source +/- TC Offset
The Time Code Offset defaults to 00:00:00:00 unless specifically set by the user.
To set the offset:
1. Use the left/right arrow keys to position the cursor under each of four double-
digit fields.
2. Use the SpinKnob to set the desired number.
3. To create a negative offset, position the cursor under the + sign and use the
SpinKnob to change to the minus sign.
Jam Sync Mode
Jam Once - Locks when time code is first received and runs independent of incoming
time code thereafter.
Jam Continuous - Locks continuously to incoming time code and resynchronizes
whenever necessary.