Filter
Top Products
!)"
"
VLAN-Stacking Table Setting
Set the stacking VLAN membership for selected interfaces to be part of the Service Provider VLAN (S-VLAN),
that is uplink ports for a 802.1Q Tunnel. This stacking VLAN is used to segregate and preserve customer VLAN
IDs for traffic crossing the service provider network. The switch supports up to 64 S-VLAN IDs.
Web Smart switch interface
To manage stacking VLAN port members,
1. Click Configuration, VLAN Stacking, S-VLAN Table.
2. Specify the S-VLAN ID number.
3. Mark the ports to be included as stacking VLAN port members for specified S-VLAN.
4. Click Add.
Figure 14: VLAN-Stacking Table Setting
Hint§
The following parameters are shown on the VLAN-Stacking Table Setting:
■ S-VLAN ID - The VLAN identifier of a stacking VLAN. (Range: 1-4094)
■ Member Ports - Switch ports that are members of the stacking VLAN. That is, ports that will double tag
ingress and egress packets.