Filter
Top Products
SW DVI Plus Series • Remote Configuration and Control 30
30
30
11. If you want to remove a device from the Devices section, do the following:
a. Click on the names of the devices to be deleted, to highlight them.
b. Select Remove Selected Devices from the Edit menu.
c. On the Remove Devices window, select or deselect any devices on the list as desired,
then click Remove.
To remove all devices from the field, select Remove All Devices from the Edit menu.
12. Click Begin. The following indicators on the Firmware Loader window show the
progress of the update:
• The Transfer Time section shows the remaining and elapsed time for the update.
• The Total Progress section displays a progress bar with Uploading... above it.
• In the Devices section, the Progress column displays an incrementing percentage
and another progress bar. The Status column displays Uploading.
Figure 32. Firmware Upload in Progress
13. The upload is complete when the Remaining Time field shows 00.00.00, the Progress
column shows 100%, and Completed is displayed above the progress bar and in the
Status field. Close the Firmware Loader window.
Figure 33. Firmware Upload Complete