Filter
Top Products
MTP U R Series • Installation
9
• RSU 129, Standard universal 1U rack shelf kit
(part #60-190-01)
• RSB 129, Basic universal 1U rack shelf (part #60-604-02)
On the standard rack shelf, the MTP U R mounts in one of four
locations to the rear of the rack or in one of four locations to the
front of the rack.
(2) 4-40 x 3/16" Screws
Use 2 mounting holes on
opposite corners.
VersaTools Basic
Rack Shelf
Quarter Rack Width False
Faceplate
MTP T VGA RS
M
T
P
T
V
G
A
R
S
M
T
P
T
V
G
A
R
S
Figure 8 — Mounting the MTP on a VersaTools shelf
MTP T
VGA
RS
MTP T
VGA RS
MTP T
VGA RS
Figure 9 — Mounting the MTP on a standard shelf
1. Remove the feet from the bottom of the MTP, if they are
installed.
2. Mount the MTP using two 4-40 x 3/16" screws in opposite
(diagonal) corners to secure the MTP to the shelf.