Extron electronic MTP U R RSA SEQ Switch User Manual


 
MTP U R Series • Installation
17
TP cable termination
N
RJ-45 termination must comply with TIA/EIA T 568A
or TIA/EIA T 568B wiring standards for all connections.
Figure 17 details the recommended termination of TP cables
with RJ-45 connectors in accordance with the TIA/EIA T 568A
or TIA/EIA T 568B wiring standards. Either standard can be
used with CAT 5/5e/6 cable, but ensure that the same standard
is used on both ends of the cable.
5
Pin
1
2
3
6
7
8
4
Wire color
White-green
NOTE If you are using Enhanced Skew-Free™
A/V cable, use the TIA/EIA T568A
standard only.
Green
White-orange
White-blue
Orange
White-brown
Brown
Wire color
T568A T568B
White-orange
Orange
White-green
White-blue
Green
White-brown
Brown
Side
Blue Blue
12345678
Insert
Twisted Pair Wires
Pins:
RJ-45
Connector
Figure 17 — TP cable termination
N
Enhanced Skew-free A/V cable is not recommended for
Ethernet/LAN applications.
DO NOT connect the input RJ-45 to LAN,
Ethernet, outside plant communications, or any
telecommunications networks.
N
This cable is specially designed for compatibility with
Extron’s Twisted Pair products that are wired using the
TIA/EIA 568 A standard.
The table below shows the MTP pin assignments for audio,
video, and RS-232 transmission using Extron MTP standards for
MTP transceivers.
Pin RGBHV RGBS Component S-Video Composite
1 Red/V sync + Red + R-Y + C + No Signal
2 Red/V sync - Red - R-Y - C - No Signal
3 Mono Audio
or RS-232 +
Mono Audio
or RS-232 +
Mono Audio
or RS-232 +
Mono Audio
or RS-232 +
Mono Audio
or RS-232 +
4 Green + Green + Y + L + Video +
5 Green - Green - Y - L - Video -
6 Mono Audio
or RS-232 -
Mono Audio
or RS-232 -
Mono Audio
or RS-232 -
Mono Audio
or RS-232 -
Mono Audio
or RS-232 -
7 Blue/H Sync + Blue/C Sync + B-Y + No Signal No Signal
8 Blue/H Sync - Blue/C Sync - B- Y - No Signal No Signal
Figure 18 — MTP pin assignments