Extron electronic MTP U R RSA SEQ Switch User Manual


 
MTP U R Series • Installation
Installation, cont’d
12
1. Remove the feet from the bottom of the MTP, if they are
installed.
2. Attach the mounting brackets to the MTP with the machine
screws provided.
3. For furniture mounting, hold the MTP with the attached
brackets against the mounting surface. Mark the bracket
screw hole locations on the mounting surface.
4. For furniture mounting, drill 3/32" (2 mm) diameter pilot
holes, 1/4" (6.3 mm) deep in the mounting surface at the
marked screw locations.
5.
For furniture mounting, insert #8 wood screws into the four
pilot holes. Tighten each screw into the mounting surface
until just less than 1/4
"
(6 mm) of the screw head protrudes.
6. For furniture mounting, align the mounting screws with
the slots in the brackets and place the MTP against the
surface, with the screws through the bracket slots.
7. For furniture mounting, slide the MTP slightly forward or
back, then tighten all four screws to secure the MTP in place.
8. For projector mounting, secure the MTP to a projector
mount by inserting the mounting bolt through the
bracket’s slotted hole.