Extron electronic MVX 88 Series Switch User Manual


  Open as PDF
of 84
 
Operation, cont’d
MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Operation
3-16
PRELIMINARY
Using presets
The current configuration (configuration 0) can be saved as a preset in any one of
16 preset memory addresses. Each switch has as many presets available from the
front panel as it has input and output buttons. For example, the MVX 44 has 8
presets (4 input buttons and 4 output buttons) available from the front panel and
the MVX 88 has 16 (8 input buttons and 8 output buttons). Preset numbers above
those available from the front panel are available under RS-232 or IR control only.
See chapter 4, “Remote Operation”.
N
• Onlytheaudioandvideotiesarestoredandrecalled;audiogainsettingsare
not saved, and they do not change when a preset is recalled.
• Presetscannot be viewed from the front panel unless they are recalled as the
current configuration. Presets can be viewed using Extron’s Windows-based
control program. See Chapter 4, “Remote Operation”, for more details.
• Thecurrentcongurationandallpresetsarestoredinnon-volatilememory.
When power is removed and restored, the current configuration is still active
and all presets are retained.
• Whenapresetisrecalled,itreplacesthecurrentconguration,whichislost
unless it is also stored as a preset. The recalled preset overwrites all of the
current configuration ties in favor of the preset configuration ties.
Example 6: Save a preset
In the following an example, the current configuration is saved as a preset. The
example shows the front panel indications that result from your actions.
1. Press and hold the Preset button for approximately 2 seconds until the Preset
LED begins blinking (figure 3-26).
PRESET PRESET
7
6
5
2 4
1
INPUTS
8
3
2
1
4
3
OUTPUTS
Press and hold the button.
2 seconds
= lit LED, = blinking LED, = unlit LED.
The LED blinks to indicate Save Preset mode.
Release the Preset button.
Preset 2
(Preset 2
assigned)
Preset 3 Preset 4 Preset 5
(Preset 5
unassigned)
Preset 9
(Preset 9
assigned)
Preset 10Preset 11Preset 12Preset 6 Preset 7 Preset 8Preset 1
All input and output buttons with assigned presets light. If you then save the configuration to a lit preset number,
the configuration data at that preset location will be overwritten.
Figure 3-26 — Enter Save Preset mode, MVX 84
 previous next