Filter
Top Products
Remote Operation, cont’d
MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Remote Operation
4-10
PRELIMINARY
Command/response table for SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
RGB delay
Set RGB delay
EX@
*
X1!
D
}
Out
X@
•Dly
X1!]
Example:
E
5*7D
}
Out5•Dly07
]
Set the RGB delay for a tie to
output 5 to 3.5 sec (7 x 0.5 sec.).
Read RGB delay
EX@
D
} X1!]
Example:
E
6D
}
05
]
Output 6 delay is 2.5 sec
(5 x 0.5 sec.).
Front panel lockout (Executive mode)
Lock front panel 1X
Exe1
]
Enable executive mode.
Unlock front panel 0X
Exe0
]
Disable executive mode.
View lock status X
X#]
Resets
Reset global presets
E
ZG
}
Zpg
]
Clear all global presets.
Reset one global preset
EX(
ZG
}
Zpg
X(]
Clear global preset
X(
.
Reset audio input levels
E
ZA
}
Zpa
]
Reset all audio input levels
such that the output is 0 dB.
Reset audio output levels
E
ZV
}
Zpv
]
Reset all audio output levels
to the professional level.
Reset all mutes
E
ZZ
}
Zpz
]
Unmute all video and audio
outputs.
Reset all RGB delay settings
E
ZD
}
Zpd
]
Reset all RGB delays to 0
seconds.
Reset whole switcher
E
ZXXX
}
Zpx
]
Clear all ties, global presets,
and mutes and reset all
audio gains to the factory
default.
Firmware upload
Upload firmware
E
upload
See “Loading firmware using SIS commands” on the next
page.
Information requests
Information request I
V
X$
X
X@
•A
X$
X
X@]
V (video) matrix size•
A (audio) matrix size
Example (MVX 84 VGA):
I
V8X4•A8X4
]
8 RGB and audio inputs and
4 RGB and audio outputs.
Request part number N
nn-nnn-nn
]
See appendix A for part #s.
Example (MVX 88 VGA A):
N
60-638-21
]
MVX 88 VGA A part # is
60-638-21.
Query controller firmware
version
Q
X1@]
Example:
Q
1.23
]
The factory-installed
controller firmware version
is 1.23 (sample value only).
N
X@
= Output number 1 – (maximum number of outputs for your model)
X1!
= RGB delay in ½ second increments (10 [5 seconds] maximum)
X#
= Front panel lock 1 = on (locked)
0 = off (unlocked)
X(
= Global preset # 00 - 16 (00 = current conguration)
X$
= Input number
1 – (maximum number of inputs for your model)
X1@
= Controller firmware version number to second decimal place