Filter
Top Products
Specifications and Part Numbers, cont’d
MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Specications and Part Numbers
A-4
PRELIMINARY
Audio output
Output gain .................................... 0 dB unbalanced (consumer) or +12 dB balanced (pro), selectable;
default = +12 dB, balanced, when output level is set to “Pro”
Number/signal type
MVX 44/84 VGA A ........... 4 stereo, balanced/unbalanced
MVX 48/88 VGA A ........... 8 stereo, balanced/unbalanced
Connectors
MVX 44/84 VGA A ........... (4) 3.5 mm captive screw connectors, 5 pole
MVX 48/88 VGA A ........... (8) 3.5 mm captive screw connectors, 5 pole
Impedance ..................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ...................................... ±0.1 dB channel to channel
Nominal level (output volume range)
+4 dBu (1.23 V) (default) balanced (pro), or
-10 dBV (316 mV) unbalanced (consumer), selectable
Maximum level (Hi-Z) ................. >+22 dBu, balanced; >+14 dBV, unbalanced at 1% THD+N at default settings
Maximum level (600 ohm) ........... >+20 dBu, balanced; >+12 dBV unbalanced at 1% THD+N at default settings
Control/remote — switcher
Serial control port ......................... 1 RS-232, 9-pin female D connector
Baud rate and protocol ................ 9600, 8-bit, 1 stop bit, no parity
Control pin configurations .......... 2 = TX, 3 = RX, 5 = GND, 9 = hardwired IR input
IR controller module ..................... IR 501 (optional remote control)
Program control ............................. Extron’s control/configuration program for Windows
®
Extron’s Simple Instruction Set (SIS
™
)
General
Power ............................................. 100 VAC to 240 VAC, 50/60 Hz, 30 watts, internal
Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling ........................................... Convection, vented
Rack mount .................................... Yes, with included full rack width rack and through-desk mounting kit,
part #70-077-03 (MBD 149)
Furniture mountable with optional under-desk mounting kit,
part #70-222-01 (MBU 149)
Enclosure type .............................. Metal
Enclosure dimensions .................. 1.75” H x 17.4” W x 8.5” D (1U high, full rack wide)
4.4 cm H x 44.2 cm W x 21.6 cm D
(Depth excludes connectors and knobs. Width excludes rack ears.)
Product weight .............................. 7.0 lbs (3.2 kg)
Shipping weight ............................ 10 lbs (5 kg)
Vibration ........................................ ISTA 1A in carton (International Safe Transit Association)
Listings............................................ UL, CUL
Compliances ................................... CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF ............................................... 30,000 hours
Warranty ........................................ 3 years parts and labor
N
Allnominallevelsareat±10%.
N
Specifications are subject to change without notice.