Filter
Top Products
Command ASCII Command
(host to switcher)
Response
(switcher to host)
Additional Description
View Aux input
Signal, Normal, and
Peak status
5S SigX1)•NormX1)
•ClpX1)]
View Aux input audio Signal, Normal,
and Peak status.
Verbose response
Sts05*SigX1)•NormX1)•
ClpX1)]
View video signal
presence
ELS} SigX1@•X1@•X1@•X1@]
View which input video signals are
present for selected wallplate.
Verbose response
SigX1@•X1@•X1@•X1@]
NOTE: Command is for selected PVT wallplate only. The non‑selected PVT wallplate may be in sleep mode until it is
switched to.
View detected audio
format
E40STAT}
X1#]
View detected audio input format for
curently selected input X!.
Verbose response
40Stat•X1!*X1)]
View VoiceLift status
34I RlyX3)•SioX3!]
View information on VoiceLift status.
View PVT wallplate
type
35I PVTplateX#•X#]
Identify wallplate type; PVT (plate 1)•
(plate 2).
View audio mute to
DSP
40S
X1$]
Unmutes when 2‑Chn PCM is available
only. Mutes when other formats are
available.
Verbose response
Sts40*X1$]
View paging sensor
status
42S
X3@]
View the priority paging sensor status.
Verbose response
Sts42*X3@]
NOTE: X! = Input number: 1 through 5
X# = PVT wallplate type:
0 = No PVT wallplate detected
1 = PVT SW HDMI D wallplate is detected
2 = PVT SW HDMI RGB D wallplate is detected
X1) = On/off status: 0 = off/disable; 1 = on/enable
X1! = Video input selection, 1‑4 only
X1@ = Video signal status:
0 = Video/TMDS signal not detected
1 = Video/TMDS signal detected
2 = Unknown
X1# = Audio format:
0 = Analog
1 = Digital
X1$ = Audio mute to DSP:
0 = Audio unmuted
1 = Audio muted
X3) = Relay status (VLR 102 response)
0 = Off
1 = On
X3! = Contact closure input state (VLR 102 response)
0 = Open
1 = Closed
X3@ = On/off status: 0 = off/disable; 1 = on/enable
PVS 405D • SIS Communication and Control 25